HEROCHECK pH
NP solution for adjusting the pH level of water, enriched with moisturizing and anti-foaming agents.
| DECLARED COMPOSITION | m/v | m/m |
| Nitrogen (N) total | 5,0% | 4,0% |
| Nitrogen (N) urea | 5,0% | 4,0% |
| Phosphorus pentoxide (P2O5) soluble in water | 30,0% | 24,0% |
HEROCHECK pH:
- Regulates the pH level of the water – water with a high pH and high hardness can significantly reduce the effectiveness of leaf treatment measures, causing economic losses, because the plants cannot fully absorb the products used. For foliar treatment, it is recommended to use water with a slightly acidic pH level (about 6.0) for optimal effectiveness.
- Improves the effectiveness of many plant protection products – recommended for use to lower the pH of the spray solution and achieve the optimal acidity of the solution required for pesticides, as well as when using reduced pesticide doses.
- An anionic solution, which also contains surfactants and anti-foaming substances, facilitating the preparation of the solution and improving the stability of the working solution mixture on the treated surface.
- Easy to use – the added color pH indicator turns the water in the beacon orange when the optimum pH for foliage treatment is reached.
DOSAGE AND METHOD OF USE:
HEROCHECK pH must be added to the water before other products!
Measuring the pH of water:
| pH of water | Dosage |
| For water with initial pH 7.5-8 | 66-75 ml per 100 litres |
| For water with initial pH 8-8,5 | 80-100 ml per 100 litres |
| For water with initial pH 8,5-9 | 120-150 ml per 100 litres |
When adjusting the pH with a color indicator – based on the amount from the previous table, add HEROCHECK pH to water with an alkaline pH (pH>7) until it turns yellow. Continue adding until the water turns orange (pH around 6), which indicates the optimum pH level for making beacon mix.
A red color indicates a too acidic pH level (under pH 4,5) if too much product has been added.
Mixing:
Fill the sprayer halfway with water and turn on the mixer. Add HEROCHEK pH until the water acquires the appropriate color. Without stopping mixing, add the planned agents in the following order: foliar fertilizers (powder), foliar fertilizers (granulated), foliar fertilizers (liquid), plant protection products soluble granules, plant protection products concentrates, emulsions, glue. Fills the sprayer with water. Continue stirring during transport and operation.
After spraying the entire solution, thoroughly wash the spray tank, hoses and nozzles.
HEROCHEK pH is compatible with most phytosanitary products. Do not mix with calcium-based products and sulfonylurea herbicides. In case of doubt, perform a compatibility test. Always use in solution.